General Description for TDA8510J:
The TDA8510J is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) power package. It contains a 26 W Bridge-Tied Load (BTL) amplifier and 2 × 13 W Single-Ended (SE) amplifiers. The device is primarily developed for multi-media applications and active speaker systems (stereo with subwoofer).
Features of TDA8510J:
The TDA8510J is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) power package. It contains a 26 W Bridge-Tied Load (BTL) amplifier and 2 × 13 W Single-Ended (SE) amplifiers. The device is primarily developed for multi-media applications and active speaker systems (stereo with subwoofer).
- Requires very few external components
- High output power
- Low output offset voltage (BTL channel)
- Fixed gain
- Diagnostic facility (distortion, short-circuit and temperature detection)
- Good ripple rejection
- Mode select switch (operating, mute and standby)
- AC and DC short-circuit safe to ground and to VP
- Low power dissipation in any short-circuit condition
- Thermally protected
- Reverse polarity safe
- Electrostatic discharge protection
- No switch-on/switch-off plop
- Flexible leads
- Low thermal resistance
- Identical inputs (inverting and non-inverting)..
Circuit diagram for TDA8510J:
 |
| TDA8510J power amplifiers 2 x 13 + 26W |
Datasheet for TDA8510J: Download
Where you can buy TDA8510J: Aliexpress
The device is primarily developed for multi-media applications and active speaker systems (stereo with subwoofer). Audio forum
ReplyDeletewhat type of power supply for this?
ReplyDeleteMalam gan. Mau tanya dong. Kalo suara gak keluar di rangkaian tda 8510 biasanya bermasalah dimana ya?
ReplyDeleteMohon pencerahannya gan.
Which ic equivalent TDA8510j
ReplyDeleteI found this ic in creative2,1 subwoofer
ReplyDeleteAlso in Creative 5.1 Inspire 5200.
ReplyDelete