3 4 W power amplifier schematic

The schematic above is amplifier based on ic TA7211P or TA7212P , circuit above using OT transformer as a booster amplifier again. The amplifier suitable used on outside / field, because by using a transformer OT is identical to the PA amplifier.

Part List :

R  = 1K , 10R , 3K3

C  = 1uF , 10uF , 1n , 68u, 3u3, 2n2 x 2, 100u 

IC = TA 7211P / TA7212P

Technical information :

Max Vcc = 15 VDC

Min Vcc  = 4 VDC

Po            = 3,4 W

Rl            = 8 Ohm

Icco         = 16 mA

Read More

LED 4 Channel Commutator Wiring diagram Schematic

This is a simple LED 4-Channel Commutator Circuit Diagram.The DS7800 voltage translator is a monolithic device that provides from 10 V to -20 V gate drive to the JFETs while at the same time providing DTL/TTL logic compatibility.

LED 4-Channel Commutator Circuit Diagram

Read More

Build a 4 18Mhz Converter Wiring diagram Schematic

Build a 4-18Mhz Converter Circuit Diagram. The unit consists of RF amplifier Q1, local oscillatorQ2, and mixer Q3. The two bands are covered without a band switch by using an i-f or 3.5 MHz. The oscillator range is 7.5 to 14.5 MHz. Incoming signals from 4 to 11 MHz are mixed with the oscillator to produce the 3.5-MHz i-f.

Signals from 11 to 18 MHz are mixed with the oscillator to also produce an i-f of 3.5 MHz. At any one oscillator frequency, the two incoming signals are 7 MHz apart. Rf amplifier input Cl/L1 comprises a high-Q, lightly loaded, tuned schema; this is essential for good band separation.

Build a 4-18Mhz Converter Circuit Diagram

Read More

1 to 4 W audio power amplifier

General Description:

The TDA1015 is a monolithic integrated audio amplifier circuit in a 9-lead single in-line (SIL) plastic package. The device is especially designed for portable radio and recorder applications and delivers up to 4 W in a 4 Ω load impedance. The very low applicable supply voltage of 3,6 V permits 6 V applications. 1 to 4 W audio power amplifier

Special features:

• single in-line (SIL) construction for easy mounting
• separated preamplifier and power amplifier
• high output power
• thermal protection
• high input impedance
• low current drain
• limited noise behaviour at radio frequencies

Circuit Diagram:

1 to 4 W audio power amplifier circuit diagram

Datasheet for TDA1015: Download

Read More